TOPTIERPRO Backup Camera Installation Guide

Power Harness (Black Connector)

Red Wire: This wire provides 12 Volt (V) power to your back-up camera. This can be connected to any 12V power source on your vehicle. However, it’s recommend to connect to your reverse lights so the camera only turns on when the vehicle is in reverse. Note: If your vehicle is equipped with trailer wiring, it’s recommended to connect to the 12V reverse light wire contained within your trailer wiring harness. Please refer to the wiring diagram(s) for your specific vehicle and/or trailer harness to determine the correct color 12V wire for the reverse lights. Tip: “Scotchloks” are an easy way to connect to an existing wire on your vehicle without damaging or cutting the factory harness. These can be found at common hardware stores. Black Wire: This is a ground which can be connected in several ways including the ground wire within your trailer wiring harness, any other ground wire at the rear of your vehicle, or connecting dir...
Read More